Garage door torsion springs are definitely one of the most important parts of your garage door opener. These springs work within a system that operates to counterbalance the weight of your garage door so that it can be lifted and lowered with ease in a safe and secure way.

Now, it is not likely that you are looking to become an expert on torsion springs and how they fit into the system that plays a vital role in opening your garage door. However, it is quite important for you to know some important things about them if you have them in your garage. Also, you should know whom you must trust if you need Las Vegas garage door opener parts.

What Are Torsion Springs?

Torsion springs are heavy-duty springs that are mounted around a metal rod that runs parallel to the door, directly above the opening of the door. With the torsion system, the springs are tensioned by stretching out with the help of pulleys and cables.

A garage door can have between one to four torsion springs, depending on the weight, size, and strength of the door. These vital parts of your garage doors can be early-set, standard, steel rolling-door, or even torque-master springs.

Early-Set Torsion Springs
These are similar to standard torsion springs, except for the fact that they are mounted in the middle part of the torsion shaft.

Standard Torsion Springs
These kinds of torsion springs are found on residential garage doors, with lighter doors only needing one spring for effective operation.

Torque-Master Torsion Springs
These are enclosed in the torsion shaft and are held in a certain place by a winding cone. This winding cone sits at the end of each torsion rod.

Steel Rolling-Door Torsion Springs
These are normally seen in industrial and commercial buildings. These springs are placed within the torsion barrel.

Among these, torque-master springs and steel rolling-door springs tend to be used only in industrial and commercial applications with much heavier garage doors.

How Torsion Spring Systems Work?

It is possible that you have already heard about garage door torsion springs, even if maybe you weren’t aware of how it actually works. It looks like a tightly wound coil. The torsion spring uses a twisting motion to release or store mechanical energy. When the garage door is opened, it releases the tension, and when the door is closed, it increases in tension.

Benefits Of Liftmaster Garage Door Torsion Spring

Though there are two types of garage door springs, extension springs and torsion springs, and torsion spring is still more popular for several vital reasons. They provide some interesting benefits, such as follows:

A Safer Option
Sometimes, things break. If a torsion spring should break, it is inside of a housing that will capture any pieces that might fall and even damage your vehicles or some other things that you have stored in your garage.

Less Noise
As these springs are not attached to the ceiling, there is less amount of noise transferred through to any room that is located above the garage. Moreover, the springs are inserted inside a shaft that is anchored in a place. This can reduce vibrations that can be very noisy.

Smoother Functioning
Torsion springs operate to balance all of the weight of your heavy garage door to the center. It plays a vital role in pulling the door up from their positions over each track.


Thus, if you have a Liftmaster garage door torsion spring, you must know about some of these important things about garage door torsion springs. Also, if you need 24-hour emergency garage door repair in Las Vegas, you can always work with Silver Fox Garage Door Repair.